Plywood with poplar inner layer and okoumè outer layers. Okoumè is an African wood with moderate dimensional stability, flexible and known for its lightness; it is the most water-repellent wood so it is not attacked by mold and woodworms.

Options

Custom dimensions (+2,00)

Insert your desired sheet dimension - please check that measures are lower then selected sheet size

What is it?

Plywood with inner layer in poplar and external layers in okoumè.

The okoumè is an African wood with moderate dimensional stability, flexible and known for its lightness.

The external appearance is of strong impact, okoumè is often used as a substitute for mahogany.

Notes for the design

On our blog a guide on how to obtain excellent results by drawing on laser cutting on wood.

Depth medium raster engraving: 0.3 mm
Depth deep raster engraving: 0.5 mm

kerf: 0.4 mm
measured on the sample (59.6 mm measured after the drawing cut with 60 mm side)

All values ​​are purely indicative and are subject to variations based on the sheet of material and the position at the time of processing.

  1. Home
  2. -
  3. Store
  4. -
  5. Laser cutting materials
  6. -
  7. Plywood
  8. -
  9. Okoumè plywood

This material is available for laser cutting service