Cardboard micro wave formed by two layers of wavy paper in havana color, covered by two layers of smooth white paper.

Custom dimensions (+2,00)

Insert your desired sheet dimension - please check that measures are lower then selected sheet size


What is it?

The micro wave cardboard is formed by two layers of brown corrugated paper, covered by two layers of white smooth paper.

Notes for the design

Because of the empty spaces between one wave and the next, corrugated cardboard is not suitable for cutting designs with parts that are too small or detailed.
Dark halos may appear on the back due to the heat of the cut.
Raster engravings are not recommended.
It is not possible to engrave with the light raster mode.

Examples of use

Packaging, boxes, prototypes of different kinds.

Ecological information

100% recyclable.

Gluing, joints and fixings

It can be glued with the most common glues for paper or double-sided tape.

Dettagli tecnici

kerf: 0.3 mm
measured on the sample (59.7 mm measured after the drawing cut with 60 mm side)

All values ​​are purely indicative and are subject to variations based on the sheet of material and the position at the time of processing.

You can use this material for laser cutting