Rigid, with a perfectly smooth surface, this resin is ideal for creating very detailed objects. The objects obtained with this material are very similar to those produced with traditional techniques.
The color is a neutral gray, slightly translucent for the thin parts, easy to photograph, makes all the details visible.
The model is created starting from a liquid photopolymer compound, solidified layer by layer from a laser source.
The resolution of this material is 50 microns (0.050mm). On request we can also print with a resolution of 25 microns.
It is possible to finish the object once it has been printed by painting it, sanding it or polishing it, but this could lead to a loss of detail.
Thickness of the layers: 0,05mm.
Moving parts: No
For food: No
Suitable for dishwashers: No
Heat resistant up to 58 ° C
This printing technique requires the creation of supports. The supports are arranged by us in the most convenient and least invasive way. Once the printing is finished, the supports are removed mechanically. It is possible that traces of the anchor points of the supports may remain on the model: you can remove them with abrasive paper.
To know all the rules to be followed to create a model with this material, consult the Technical Details tab.