Material details

Plastic for mechanical parts (nylon PA12 MJF) for 3D printing: material sheet

Appearance: • • • •
Details: • • • •
Resistance: • • • • •
Flexibility: • • •

- Economic
- Resistant
- Flexible

On this page you can see all the characteristics of the material.

Description

This material consists of a polyamide (nylon) powder solidified by chemical agents, printed with HP MJF (Mult Jet Fusion) technology. It is an extremely versatile material, which can be flexible at low thicknesses, but has such resistance as to make it ideal for 3D printing of parts with structural necessity.

The plastic for mechanical parts offers a great impact resistance, it is stable when exposed to light and stable if exposed to any type of weather conditions.

The models made with this material have a higher density and a lower porosity than models produced with SLS plastic. The surface is more detailed and the walls can be thinner (0.6 mm against 0.8 mm in the SLS print).

At a minimum thickness of 0.6 mm the parts are flexible, while above 2.0 mm, the elements become rigid. 3D printed nylon lends itself as a material for creating objects with different uses, from aesthetic prototypes to functional objects such as electronic device covers, box mods, to jewelery.

Maximum printable volume: 250 x 340 x 360 mm

You can not insert multiple objects into a single template / file.

  • Moving parts: Yes
  • Watertight: No
  • For food: No
  • Suitable for dishwashers: Yes
  • Recyclable: No
  • Heat resistant up to 175 ° C
  • Thickness of the layers: 0.1mm

To know all the rules to be followed to create a model with this material, consult the Technical Details tab.

Dettagli tecnici

DIMENSIONS
Maximum: X + Y + Z = 250 x 340 x 360 mm
Minimum: X + Y + Z = 10 mm

WALL THICKNESS:
Minimum wall thickness: 0.6 mm

OTHER DETAILS:
minimum size for object details: 0.2 mm
spill hole of the non-sintered material: minimum 4mm

TEXT:
for embossed text: min 0.5 mm thick
for engraved text: min 0.5 mm depth