Plywood with internal layer in poplar and external layers in okoumè. Ikoumè is an African wood with moderate dimensional stability, flexible and known for its lightness; it is the most water-repellent wood so it is not attacked by mold and woodworm.

Options

Vectorealism laser cutting format | P1 191x191
Vectorealism laser cutting format | P2 394x394
Vectorealism laser cutting format | P3 800x394
Clear

Custom dimensions (+2,00)

Enter the dimensions in millimeters - make sure they are less than the size of the selected plate!

Description

What is it?

Plywood with internal layer in poplar and external layers in okoumè.

Amoumè is an African wood with moderate dimensional stability, flexible and known for its lightness.

The external appearance is of strong impact, the okoumè is often used in place of the mahogany.

Notes for the design

On our blog a guide on how to obtain excellent results by drawing on laser cutting on wood.

Technical details

Depth medium raster engraving: 0.3 mm
Depth deep raster engraving: 0.5 mm

kerf: 0.4 mm
measured on the sample (59.6 mm measured after the drawing cut with 60 mm side)

All values ​​are purely indicative and are subject to variations based on the sheet of material and the position at the time of processing.

  1. Home
  2. -
  3. Store
  4. -
  5. Laser cutting materials
  6. -
  7. Plywood
  8. -
  9. Okoumè plywood

This material is available for laser cutting service