Slabs of poplar plywood verniciato di nero con mordente all’acqua sul fronte e sul retro.


Vectorealism laser cutting format | P1 191x191
Vectorealism laser cutting format | P2 394x394
Vectorealism laser cutting format | P3 800x394
Vectorealism laser cut format | P4 800x800

Custom dimensions (+2,00)

Enter the dimensions in millimeters - make sure they are less than the size of the selected plate!


Poplar plywood verniciato con mordente all’acqua nero sul fronte e sul retro.

The vector or raster engraving reveals the natural color of the wood, thus making a golden effect that stands out with the color given on the surface.

Due to the artisan realization with water-based stain, the coloring can vary in intensity and hue from one panel to another or even in different points of the same sheet.

Plywood is a semi-finished product in layers of wood peeled from the trunk of the tree, glued together. It has great resistance to breakage, shrinkage and deformation. The inner and outer layers are combined by crossing the veins alternately.

The exclusive use of poplar gives this plywood a very light color as well as flexibility, lightness and resistance.

Precisely because the fibers of the layers are crossed, the plywood can have variations in depth. Once laser cut the edges remain smooth, with a color similar to bronze.

Technical details

Depth medium raster engraving: 0.55 mm
Depth deep raster engraving: 0.9 mm

kerf: 0.3 mm
measured on the sample (59.7 mm measured after the drawing cut with 60 mm side)

All values ​​are purely indicative and are subject to variations based on the sheet of material and the position at the time of processing.

  1. Home
  2. -
  3. Store
  4. -
  5. Laser cutting materials
  6. -
  7. Painted plywood
  8. -
  9. Black painted poplar plywood

This material is available for laser cutting service