Double wave corrugated cardboard made up of two layers of wavy brown paper, covered with two layers of smooth brown paper.

Options

Vectorealism laser cutting format | P1 191x191
Vectorealism laser cutting format | P2 394x394
Vectorealism laser cutting format | P3 800x394
Clear

Custom dimensions (+2,00)

Enter the dimensions in millimeters - make sure they are less than the size of the selected plate!

Description

What

Double wave corrugated cardboard is made up of two layers of corrugated Havana-colored paper, covered by two layers of smooth Havana-colored paper. The sign of the waves is visible on the surface.

Notes for the design

Due to the empty spaces between one wave and another, corrugated cardboard is not suitable for cutting drawings with too small or detailed parts: the layers of material can divide.
Dark halos may appear on the back due to the heat of the cut.
Raster engravings are not recommended, due to the thin paper layer that would leave the underlying waves visible. Light raster engraving is not recommended.

The thickness of the material is considered nominal.

Examples of use

Packaging, boxes, prototypes of different kinds.

Ecological information

100% recyclable.

Gluing, joints and fixings

It can be glued with the most common glues for paper or with double-sided tape.

 

Technical details

kerf: 0.3 mm
measured on the sample (59.7 mm measured after the drawing cut with 60 mm side)

All values ​​are purely indicative and are subject to variations based on the sheet of material and the position at the time of processing.

  1. Home
  2. -
  3. Store
  4. -
  5. Laser cutting materials
  6. -
  7. Cardboard
  8. -
  9. Double corrugated cardboard

This material is available for laser cutting service