Cardboard micro wave formed by two layers of wavy paper in havana color, covered with a layer of smooth havana paper and a layer of white paper.


Vectorealism laser cut format | 80 x 45
Vectorealism laser cutting format | P1 191x191
Vectorealism laser cutting format | P2 394x394
Vectorealism laser cutting format | P3 800x394

Custom dimensions (+2,00)

Enter the dimensions in millimeters - make sure they are less than the size of the selected plate!


What is it?

The micro wave cardboard is made up of two layers of corrugated paper in Havana color, covered by a layer of smooth Havana paper and a layer of white paper.

Notes for the design

Due to the empty spaces between one wave and another, corrugated cardboard is not suitable for cutting designs with parts that are too small or detailed.
Dark halos may appear on the back due to the heat of the cut.
Raster engravings are not recommended.
It is not possible to engrave with the light raster mode.

Examples of use

Packaging, boxes, prototypes of different kinds.

Ecological information

100% recyclable.

Gluing, joints and fixings

It can be glued with the most common glues for paper or with double-sided tape.

Technical details

kerf: 0.3 mm
measured on the sample (59.7 mm measured after the drawing cut with 60 mm side)

All values ​​are purely indicative and are subject to variations based on the sheet of material and the position at the time of processing.

  1. Home
  2. -
  3. Store
  4. -
  5. Laser cutting materials
  6. -
  7. Cardboard
  8. -
  9. White and havana microwave carton

This material is available for laser cutting service