Acrylic (PMMA, methacrylate, also known under commercial names such as Plexiglas or Perspex) mirror red


Vectorealism laser cutting format | P1 191x191
Vectorealism laser cutting format | P2 394x394
Vectorealism laser cutting format | P3 800x394
Vectorealism laser cut format | P4 800x800

Custom dimensions (+2,00)

Enter the dimensions in millimeters - make sure they are less than the size of the selected plate!



Mirror acrylic is obtained from a colorless acrylic sheet on which a thin metallic foil is applied on the back, which in turn is covered with a scratch-resistant protective layer.
The acrylic mirror reflects perfectly without distortions, this feature makes the material comparable to ordinary glass mirrors, but with the advantage of a much lower weight.

Examples of use

Decorative mirrors, external mirrors, adhesive mirrors, jewelry and decorations in general.
Gluing, joints and fixings.

Gluing, joints and fixings

It can be easily glued. Some adhesives suitable for acrylic, if applied on the back, after some time may corrode the mirror sheet. It is possible to design three-dimensional objects with removable or permanent joints. Screws and bolts can also be used to join different acrylic parts.
It can also be glued on other materials.

Technical details

Depth medium raster engraving: 0.25 mm
Depth deep raster engraving: 0.60 mm

kerf: 0.2 mm
measured on the sample (59.8 mm measured after the drawing cut with 60 mm side)

All values ​​are purely indicative and are subject to variations based on the sheet of material and the position at the time of processing.

This material is available for laser cutting service